Wheel brushes knotted, full cable joint brushes, with hole

Expansion Joint Wire Brush 12" Dia. .035 CS 1" Arbor, 3/8" Drive Pin Hole

EDP:: 82078

Expansion Joint Wire Brush 12" Dia. .035 CS 1" Arbor, 3/8" Drive Pin Hole 2

Technical data

Distributors-Search

Technical information

Expansion Joint Wire Brush 12" Dia. .035 CS 1" Arbor, 3/8" Drive Pin Hole

Item number product.detail.hint.sku: 79182078
Dia. external: 12 Inch
Dia. external: 300 mm
Dia. filament material: .035 Inch
Dia. filament material: 0.9 mm
Dia. hole: 1 Inch
Dia. hole: 25.4 mm
EDP no.: 82078
Filament material: Steel wire (ST)
Installation width: 1/2 Inch
Max. RPM: 6000 RPM
Mounting system: center hole
Number, knots: 40
RPM, optimum, from: 2000 RPM
RPM, optimum, to: 3000 RPM
Trim length: 3 Inch
Trim length: 76 mm
Width: 3/8 Inch
Width: 10 mm
Packaging unit: 2 pieces

Description

For brushing out loose and semi-solid substances, such as stone, grit and dross from joints and expansion joints in road and airport construction.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire is temperature-resistant up to 600°F.

Advantages

Aggressive brushing action due to tightly-twisted wire knots.
Extra-slim design enables optimal access to hard-to-reach areas such as joints.
Long service life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.

Workpiece materials: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Downloads