Wheel brushes crimped INOX-TOTAL, shank-mounted

INOX-TOTAL Crimped Wire Wheel Brush 2" Dia. .008 SS 1/4" Shank

RBUIT 5015/6,35 INOX 0,20

EDP:: 82744

INOX-TOTAL Crimped Wire Wheel Brush 2" Dia. .008 SS 1/4" Shank 1

INOX-TOTAL Crimped Wire Wheel Brush 2" Dia. .008 SS 1/4" Shank 2

INOX-TOTAL Crimped Wire Wheel Brush 2" Dia. .008 SS 1/4" Shank Youtube

Technical data

Distributors-Search

Technical information

INOX-TOTAL Crimped Wire Wheel Brush 2" Dia. .008 SS 1/4" Shank

Item number product.detail.hint.sku: 79182744
Dia. external: 2 Inch
Dia. external: 50 mm
Dia. filament material: .008 Inch
Dia. filament material: 0.2 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP number: 82744
Filament material: Stainless steel wire (INOX)
Mounting system: Shank
Overall length: 2
Overall length: 50 mm
RPM, max.: 12000 RPM
Trim length: 3/4 Inch
Trim length: 19 mm
Width: 5/8 Inch
Width: 15 mm
Packaging unit: 10 pieces

Description

Designed for cleaning, deburring, and removing heat discoloration.

In addition to brushes with a stainless steel filament, PFERD also offers brushes of the INOX-TOTAL type for work on stainless steel (INOX). It is particularly well suited to use in critical environments.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

Advantages

Maximum protection against corrosion as all components are produced from stainless steel (INOX) of quality 1.4310 (V2A).
Highly flexible, enabling optimal adaptation to the workpiece contour.
Very corrosion-resistant.
Creates fine surfaces.
The brush is degreased and does not leave any oil residue on the workpiece.

Recommendations for use

Please observe the recommended rotational speeds.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening

Compatible power tools: Flexible shaft drive; Power drill; Straight grinder

Downloads