Universal solid carbide end mill with five flutes UCD5, radius corner design with chip dividers, 3xD

1mm Radiused End Mill with Chip Breakers, 5 flutes, 16mm Dia, 50mm APMX, 110mm OAL, Weldon shank, Universal

Choose options

Cutting diameter DC

0.236 Inch 0.315 Inch 0.394 Inch 0.472 Inch 0.63 Inch 0.787 Inch 0.984 Inch

Technical information

1mm Radiused End Mill with Chip Breakers, 5 flutes, 16mm Dia, 50mm APMX, 110mm OAL, Weldon shank, Universal

Description

The solid carbide end mills are designed for universal use on a variety of materials.

Mills with chip dividers for dynamic machining and trochoidal milling.

Advantages

Recommendations for use

Workpiece materials: Aluminum; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Cast iron; Cast steel; Cobalt-based alloys; Copper; Ductile cast iron; Ferrite (magnetic material); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hardened, heat-treated steels over 370 HV (38 HRC); Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Roller-bearing and ball-bearing steels; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Titanium; Titanium alloys; Tool steels; Tough aluminium alloys

Downloads