Power Tube Brush 1" Dia. .006 Carbon Steel Wire 1/4" Stem DS/DS

Technical information

Item number product.detail.hint.sku: 79183436
Dia. external: 1 Inch
Dia. external: 25 mm
Dia. filament material: .006 Inch
Dia. filament material: 0.15 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 83436
Filament material: Steel wire (ST)
Max. RPM: 2500 RPM
Mounting system: Shank
Overall length: 5-1/2 Inch
Overall length: 140 mm
RPM, optimum, from: 500 RPM
RPM, optimum, to: 1500 RPM
Width: 2-1/2 Inch
Width: 64 mm
Packaging unit: 10 pieces

Description

The high-performance tube brush is highly designed for deburring cross holes and for cleaning threads.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire is temperature-resistant up to 600°F.

Advantages

Long tool life due to high filament density and double spirals.
Long service life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.

Safety notes

For safe use, guide the brush into the workpiece before beginning work.
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Compatible power tools: Flexible shaft drive; Manual application; Power drill

Downloads

Tube brushes crimped, smooth, double stem, double-spiral, shank-mounted

Power Tube Brush 1" Dia. .006 Carbon Steel Wire 1/4" Stem DS/DS