POLICLEAN discs PCLS

POLICLEAN® PLUS Unmounted Wheel, 3" x 1/2, 1/4" Center Hole, Aluminum oxide

EDP:: 44790

POLICLEAN® PLUS Unmounted Wheel, 3" x 1/2, 1/4" Center Hole, Aluminum oxide 2

Technical data Change variant

Distributors-Search

Choose options

Dia. external

3 Inch 4 Inch 6 Inch

Version

PCLS PLUS

Reset Filter

Matching accessories & spare parts

Technical information

POLICLEAN® PLUS Unmounted Wheel, 3" x 1/2, 1/4" Center Hole, Aluminum oxide

Item number product.detail.hint.sku: 44692076
Abrasive: Aluminum oxide A
Dia. external: 3 Inch
Dia. external: 75 mm
Dia. hole: 1/4 Inch
Dia. hole: 6 mm
EDP no.: 44790
Max. RPM: 10000 RPM
RPM, optimum, from: 4000 RPM
RPM, optimum, to: 5100 RPM
Version: PCLS PLUS
Width: 1/2 Inch
Width: 13 mm
Packaging unit: 6 pieces

Description

For coarse cleaning work such as removing paint, scale, heat discoloration, rust and adhesive residues in peripheral grinding.

POLICLEAN® is a coarsely structured, abrasive, non-woven cleaning fabric that was developed from a special combination of synthetic fibres and abrasive grain.

Advantages

High flexibility and open structure mean optimal adaptation to contours and no loading of the product itself.
The PLUS version (blue) has a considerably higher stock removal rate and a very good service life, and it is very aggressive.

Recommendations for use

For the best performance, use with a recommended peripheral speed of 3,000-4,000 SFPM. This provides an ideal compromise between stock removal rate, surface quality, thermal load on the workpiece and tool wear.
For work on larger surfaces, stack several POLICLEAN® discs on the appropriate arbor.

Ordering notes

Please order compatible arbor separately.

Safety notes

For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Workpiece materials: Aluminum; Annealed cast iron; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys; Zinc

Applications: Cleaning; Roughening; Surface work

Compatible power tools: Drive spindle; Flexible shaft drive; Straight grinder

Downloads