POLICAP® Seamless Abrasive Cone, 7/8" x 3-3/8, 3/4"Taper, 60 Grit,Aluminum oxide

Technical information

Item number product.detail.hint.sku: 42330212
Abrasive: Aluminum oxide A
Dia. external: 15/16 Inch
Dia. external: 24 mm
Dia. external, small: 3/4 Inch
Dia. external, small: 21 mm
EDP no.: 46017
Grit size: 60
Height: 3-3/8 Inch
Height: 85 mm
RPM, optimum: 12000 RPM
Packaging unit: 10 pieces

Description

POLICAP® abrasive spiral bands with a conical shape.

POLICAP® products have a seamless design and the entire surface area can be used.

For universal use on steel workpieces (hardened, heat-treated, non-hardened). Specifically developed for special applications, e.g. in tool and die-making and repair. Also works on plastics, wood and fillers in model crafting.

Advantages

Consistent shape accuracy and excellent fine grinding due to special manufacturing.
Easy product change.

Recommendations for use

To easily change the abrasive caps and cones, give them a slight clockwise twist and pull them up and off. When doing so, leave the abrasive holder clamped in the power tool, and fix in place.
For best performance, use at a recommended peripheral speed of 2,000-4,000 SFPM.

Safety notes

The maximum permitted peripheral speed is 5,500 SFPM.
For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.

Workpiece materials: Cast steel; Hardened, heat-treated steels over 370 HV (38 HRC); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC)

Applications: Leveling; Step-by-step fine grinding; Surface work

Compatible power tools: Flexible shaft drive; Straight grinder

Downloads

POLICAP cones conical (PCH)

POLICAP® Seamless Abrasive Cone, 7/8" x 3-3/8, 3/4"Taper, 60 Grit,Aluminum oxide