Productive, ergonomic, future-proof
The glass industry demands the highest precision, efficiency, and ergonomics. Especially during the processing and servicing of glass molds, residues must be reliably removed and fine engraving precisely reworked. The RCK drive system from PFERD TOOLS offers an innovative solution for this.
Where is the RCK drive system used in the glass industry?
The RCK drive system is used especially for tool and mold construction, as well as for repair and service work. Typical applications involve glass bottle molds, which consist of two form halves. During production, these forms are subjected to high loads. Adhesions and residues arise on the forms, which can compromise the quality of the later glass products. This is where the RCK drive system ensures precise and efficient reworking.
In which typical applications can the RCK drive system be used?
In practice, the focus is thoroughly cleaning molds and precisely restoring surfaces. Residues or adhesions must be removed so that engraving, manufacturer’s specifications, or production codes remain clear and cleanly visible in the glass.
The RCK drive system enables controlled processing with optimal speed—crucial for processing delicate structures reliably and economically.
What tools are most commonly used with the RCK drive system?
Various grit sizes and diameters of POLINOX tools, flap wheels, brushes and abrasive spiral bands are especially common in the glass industry.
A compelling advantage of the RCK drive system is that speeds (or RPM) can be set in memory for the appropriate consumable being used by each handpiece.
What special requirements does glass processing place on the RCK drive system?
The biggest challenge is the right speed. With speeds that are too high or too low, tool wear increases drastically, which results in higher costs and more frequent tool change.
With the RCK drive system, users can set the optimal speed for each tool, which means that
- the service life of the tools increases,
- costs are reduced,
- and the economic efficiency is significantly improved.
What feedback has been received from RCK drive system users?
The response from the glass industry is very positive. Users report significantly reduced tool wear, lower noise levels, and noticeably less physical strain.
Users who have previously worked with other systems are convinced of the system's advantages after only a short period using it. Currently, many users are working with the GS 4/100 handpiece combined with rigid extensions to achieve different form depths.
