HSS Twist Drill Jobber Length M35 5/32″ INOX

Technical information

HSS Twist Drill Jobber Length M35 5/32″ INOX

Item number product.detail.hint.sku: 25204044
Angle: 135 °
Diameter: 5/32 Inch
Diameter: 3.97 mm
EDP no.: 20050
Flute length: 2 Inch
Flute length: 51 mm
Helix angles: 36
Overall length: 3-1/8 Inch
Overall length: 79 mm
PFERD TOOLS type: SPB M35 5/32" INOX
RPM, grey cast iron, white cast iron: 800 - 2000 RPM
RPM, hard non-ferrous metals: 2000 - 3990 RPM
RPM, rust and acid-resistant steels: 800 - 1600 RPM
RPM, soft non-ferrous metals: 800 - 4780 RPM
RPM, steels over 220 HV (95 HB): 1600 - 2000 RPM
Version: INOX
Packaging unit: 10 pieces

Description

Drill bits with cross grinding for industrial use. Fully ground, right-hand turning to produce precise drill holes due to their high concentricity and exact centering. PFERD TOOLS offers spiral drills STEEL (118 ° point angle) and INOX (135 ° point angle) versions.

High-performance HSSE-Co5 (M35) drill bit for industrial use on INOX and other non-ferrous metals. The fully ground right-hand turning design with cross grinding provides an exact centering drill tip and a high level of concentricity.

Advantages

Very good chip removal.
High concentricity.
Exact centering and low feed force thanks to cross grinding.
Ideal for tough and hard materials, such as alloyed and high-strength steel, stainless steel (INOX).
Robust tip profile.
Very durable.
Very good temperature resistance due to Co content.

Recommendations for use

Observe the recommended rotational speed.
When drilling metals, use a high-quality cutting oil or coolant, if possible. This facilitates smooth running and extends the drill service life. Exception: when working on aluminum, use kerosene instead of cutting oil.
To avoid corrosion when working on stainless steel (INOX), remove any particles that break away from the workpiece. Clean the workpiece chemically or mechanically (etching/polishing, etc.).

Safety notes

Wear eye protection!
Follow the safety instructions!

Workpiece materials: Aluminum; Annealed cast iron; Black annealed cast iron (GTS, GJMB); Brass; Bronze; Case-hardened steels; Casting scale; Casting scale with sand contamination and metal contamination; Cast iron; Cast steel; Chipboard; Cobalt-based alloys; Copper; Ductile cast iron; Elastomers; Fibre-reinforced thermosetting plastics (GRP, CRP); Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content > 40 %; Fibre-reinforced thermosetting plastics (GRP, CRP) with a fibre content ≤ 40 %; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hard aluminium alloys; Hard non-ferrous metal; Hardwood; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other; Other non-ferrous metals; Plastics; Roller-bearing and ball-bearing steels; Soft aluminium alloys; Soft non-ferrous metal; Soft titanium alloys (tensile strength 500 N/mm²); Soft wood; Stainless steel (INOX); Steel; Steel, cast steel; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Titanium; Titanium alloys; Tool steels; Tough aluminium alloys; White annealed cast iron (GTW, GJMW); Wood; Zinc

Applications: Drilling

Compatible power tools: Automated centers; Column drill; Power drill; Tool machine

Downloads

HSS twist drill bits, HSSE N INOX

HSS Twist Drill Jobber Length M35 5/32″ INOX

Included in