High-performance tungsten carbide burs, TOUGH cut, Oval bur – Shape E

Carbide Bur SE-3 Oval Shape TOUGH Double Cut 1/2" x 7/8" x 1/4" Shank

EDP:: 22260

Carbide Bur SE-3 Oval Shape TOUGH Double Cut 1/2" x 7/8" x 1/4" Shank 2

Carbide Bur SE-3 Oval Shape TOUGH Double Cut 1/2" x 7/8" x 1/4" Shank 3

Carbide Bur SE-3 Oval Shape TOUGH Double Cut 1/2" x 7/8" x 1/4" Shank Youtube

Technical data

Distributors-Search

Technical information

Carbide Bur SE-3 Oval Shape TOUGH Double Cut 1/2" x 7/8" x 1/4" Shank

Item number product.detail.hint.sku: 21722260
Cut: TOUGH
Dia. external: 3/8 Inch
Dia. external: 9.5 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 22260
Length, cut: 5/8 Inch
Length, cut: 15.9 mm
Overall length: 2-3/8 Inch
Overall length: 60.33 mm
RPM from, grey cast iron, white cast iron: 8000 RPM
RPM from, hardened, heat-treated steels over 370 HV (38 HRC): 8000 RPM
RPM from, steels up to 370 HV (38 HRC): 8000 RPM
RPM to, grey cast iron, white cast iron: 19000 RPM
RPM to, hardened, heat-treated steels over 370 HV (38 HRC): 11000 RPM
RPM to, steels up to 370 HV (38 HRC): 19000 RPM
Radius: 0.157 Inch
Radius: 3.98 mm
SCTI-No.: SE-3
Packaging unit: 1 piece

Description

The TOUGH cut has been specially designed for tough operating conditions such as in shipyards, foundries and steel construction. It is also ideal for all demanding production environments where frequent tooth breakages and other damage to conventional burs occur.

Oval bur.

Advantages

The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.
Innovative quick-mounting system guarantees convenient handling and cool grinding
Minimized tooth chipping/breakage, splintering, and bur failures due to very robust, high-performance cut.
Can also be used at a lower rotational speed.
Due to their extreme impact resistance, they are an ideal option when an extended-shank bur is needed.

Recommendations for use

Observe the recommended rotational speed.
The TOUGH cut can be used on materials up to 580 HV (54 HRC). For hard materials, it is recommended to test the bur on the same material before using on the actual workpiece.
TOUGH cut carbide burs are also designed for high-impact applications when using shank extensions, for applications with a high surface contact angle, for work on narrow contours, and for applications where slower rotational speeds are used.
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Workpiece materials: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Case-hardened steels; Cast iron; Cast steel; Grey/nodular cast iron (GG/GJL, GGG/GJS); Hardened, heat-treated steels over 370 HV (38 HRC); Steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels over 220 HV (> 95 HB); Steels up to 220 HV (< 95 HB); Steels up to 370 HV (< 38 HRC); Tool steels; White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling out; Surface work

Compatible power tools: Flexible shaft drive; Straight grinder

Downloads