High-performance tungsten carbide burs, CAST cut, Cylindrical bur with radius end - Shape C

Carbide Bur SC-5 Cylindrical Radius End CAST Cut 1/2″ x 1″ x 1/4″ Shank

EDP:: 24469

Carbide Bur SC-5 Cylindrical Radius End CAST Cut 1/2″ x 1″ x 1/4″ Shank 2

Carbide Bur SC-5 Cylindrical Radius End CAST Cut 1/2″ x 1″ x 1/4″ Shank Youtube

Technical data

Find a distributor

Technical information

Carbide Bur SC-5 Cylindrical Radius End CAST Cut 1/2″ x 1″ x 1/4″ Shank

Item number product.detail.hint.sku: 21724469
Cut: CAST
Dia. external: 1/2 Inch
Dia. external: 12.7 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 24469
Length, cut: 1 Inch
Length, cut: 25.4 mm
Overall length: 2-3/4 Inch
Overall length: 69.85 mm
RPM, grey cast iron, white cast iron: 12000 - 20000 RPM
SCTI-No.: SC-5
Packaging unit: 1 piece

Description

With the CAST cut, PFERD TOOLS has developed innovative burs specifically for work on cast iron. These burs achieve incredibly high stock removal on cast iron and operate with significantly reduced vibration and noise.

Cylindrical bur with rounded radius end, shape C.

Special features

Up to 100% higher stock removal rate on cast iron than conventional double cut burs, due to an innovative tooth design.
Significantly increased aggressiveness, creates large chips, and has very good chip removal.
Comfortable to use due to reduced vibration and less noise.
The highly accurate concentricity enables precise work free from chatter marks. This considerably reduces wear on the bur and power tool or machine.

Recommendations for use

Use the burs on powerful power tools with elastically mounted spindles to avoid unwanted vibration.
Observe the recommended rotational speed.
For the most cost-effective bur use, work with higher rotational/peripheral speeds. For burs with a 1/4" shank diameter, use power tools with a power output from 300 watts.

Safety notes

Very high speeds can cause discoloration on the shank. This does not constitute a safety risk.

Workpiece materials: Annealed cast iron; Black annealed cast iron (GTS, GJMB); Cast iron; Grey/nodular cast iron (GG/GJL, GGG/GJS); White annealed cast iron (GTW, GJMW)

Applications: Cutting out holes; Deburring; Leveling; Milling; Milling; Surface work; Work on weld seams

Compatible power tools: Automated centers; Flexible shaft drive; Straight grinder; Tool machine

PFERD TOOLS VALUE

PFERD TOOLS EFFICIENCY

recommends CAST cut burs for preventing fatigue, saving resources, and producing excellent work.

PFERD TOOLS ERGONOMICS

recommends CAST cut burs as an innovative solution for comfortable working and significantly reduced vibration and noise.

Downloads

Included in

High-performance tungsten carbide bur set, CAST cut TC-SET 5-PIECE - CAST