Felt flap discs

Felt Flap Disc, 4-1/2" x 7/8, Hard Grade

FFS 115/22,23 H

EDP:: 48803

Felt Flap Disc, 4-1/2" x 7/8, Hard Grade 1

Felt Flap Disc, 4-1/2" x 7/8, Hard Grade 2

Felt Flap Disc, 4-1/2" x 7/8, Hard Grade 3

Technical data Change variant

Distributors-Search

Choose options

Dia. external

4-1/2 Inch 5 Inch

Version

H (hard) W (soft)

Reset Filter

Matching accessories & spare parts

Polishing paste G-PP 1 VP STEELOX

Polishing paste G-PP 2 VP ALU

Polishing paste G-PP 3 VP NON-FERROUS

Polishing paste G-PP 4 HGP UNIVERSAL

Polishing paste G-PP 5 HGP PLAST

Polishing paste K-PP 1 VP STEELOX

Polishing paste K-PP 2 VP ALU

Polishing paste K-PP 3 VP NON-FERROUS

Polishing paste K-PP 4 HGP UNIVERSAL

Polishing paste K-PP 5 HGP PLAST

Technical information

Felt Flap Disc, 4-1/2" x 7/8, Hard Grade

Item number product.detail.hint.sku: 44371115
Dia. external: 4-1/2 Inch
Dia. external: 115 mm
Dia. hole: 7/8 Inch
Dia. hole: 22.23 mm
EDP number: 48803
PFERD type: FFS 115/22,23 H
RPM, max.: 8350 RPM
RPM, optimum: 1650 RPM
Version: H (hard)
Width: 7/8 Inch
Width: 22 mm
Packaging unit: 5 pieces

Description

Felt flap discs are used for pre-polishing and high-gloss polishing on medium-sized to large components.

Due to their hardness and flexibility, felt flap discs are used when the exact form of geometric shapes has to be maintained. As a general rule, diamond polishing pastes and polishing paste bars are used for this.

Advantages

Conforms to contours due to high flexibility.
Can be freely shaped, meaning they can be used on complicated geometries.
Low thermal load on the workpiece.

Recommendations for use

Use the hard type for pre-polishing of even surfaces. If a very fine finish is desired, the hard and soft types can be used successively.

Workpiece materials: Aluminum; Brass; Bronze; Cast steel; Cobalt-based alloys; Copper; Fibre-reinforced thermosetting plastics (GRP, CRP); Hardened, heat-treated steels over 370 HV (38 HRC); Nickel-based alloys (e.g. Inconell and Hastelloy); Stainless steel (INOX); Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Titanium; Titanium alloys

Applications: Polishing

Compatible power tools: Angle grinder; Cordless angle grinder

Downloads