Cup brush, crimped, universal, for straight grinders, shank-mounted

Mounted Crimped Cup Brush 2" Dia. .014 Carbon Steel 1/4" Shank

EDP:: 763858

Mounted Crimped Cup Brush 2" Dia. .014 Carbon Steel 1/4" Shank 2

Mounted Crimped Cup Brush 2" Dia. .014 Carbon Steel 1/4" Shank 3

Technical data Change variant

Distributors-Search

Choose options

Dia. external

2 Inch 3 Inch

Dia. filament material

.012 Inch .040 Inch

Filament material

Silicon carbide (SiC) Steel wire (ST)

Reset Filter

Technical information

Mounted Crimped Cup Brush 2" Dia. .014 Carbon Steel 1/4" Shank

Item number product.detail.hint.sku: 43740003
Dia. external: 2 Inch
Dia. external: 50 mm
Dia. filament material: .012 Inch
Dia. filament material: 0.3 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 763858
Filament material: Steel wire (ST)
Max. RPM: 13000 RPM
Mounting system: Shank
Packaging: POS packaging
RPM, optimum, from: 6500 RPM
RPM, optimum, to: 13000 RPM
Trim length: 3/4 Inch
Trim length: 19 mm
Packaging unit: 5 pieces

Description

Designed for cleaning, derusting and smoothing. Perfect tool for the removal of corrosion and paint. Ideal for brushing on large, flat and easily accessible surfaces with the entire brush face applied to the workpiece.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Advantages

Highly flexible, enabling optimal adaptation to the workpiece contour.
Packaged for retail.
Long service life through use of PFERD special wire.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use a power tool with a minimum output of 300 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Cast iron; Cast steel; Elastomers; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC); Thermoplastics; Thermosetting plastics; Wood

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing oxide layers; Roughening

Compatible power tools: Flexible shaft drive; Power drill; Straight grinder

Downloads