CC-GRIND-ROBUST SG STEELOX ★★★☆

Grinding disc, CC-GRIND®-ROBUST, 4-1/2" x 7/8, SG STEELOX, Ceramic

EDP:: 61148

Grinding disc, CC-GRIND®-ROBUST, 4-1/2" x 7/8, SG STEELOX, Ceramic 2

Grinding disc, CC-GRIND®-ROBUST, 4-1/2" x 7/8, SG STEELOX, Ceramic 3

Grinding disc, CC-GRIND®-ROBUST, 4-1/2" x 7/8, SG STEELOX, Ceramic 4

Grinding disc, CC-GRIND®-ROBUST, 4-1/2" x 7/8, SG STEELOX, Ceramic 5

Grinding disc, CC-GRIND®-ROBUST, 4-1/2" x 7/8, SG STEELOX, Ceramic 6

Grinding disc, CC-GRIND®-ROBUST, 4-1/2" x 7/8, SG STEELOX, Ceramic Youtube

Technical data Change variant

Distributors-Search

Choose options

Dia. external

4-1/2 Inch 5 Inch

Mounting system

center hole

Reset Filter

Technical information

Grinding disc, CC-GRIND®-ROBUST, 4-1/2" x 7/8, SG STEELOX, Ceramic

Item number product.detail.hint.sku: 64195115
Abrasive: Ceramic CO
Dia. external: 4-1/2 Inch
Dia. external: 115 mm
Dia. hole: 7/8 Inch
Dia. hole: 22.23 mm
EDP no.: 61148
Max. RPM: 13300 RPM
Mounting system: center hole
Shape: CC-GRIND®-ROBUST
Packaging unit: 10 pieces

Description

The wide range Performance Line SG offers high-performance solutions for every application and material. Performance Line SG products achieve optimum results with excellent economic efficiency.

With the CC-GRIND®-ROBUST, PFERD TOOLS offers a modern, high-performance and ergonomic alternative to conventional grinding wheels, flap and fibre discs.

Grinding disc for steel and stainless steel (INOX). High grinding performance and maximum tool life.

Advantages

Highly aggressive abrasive produces fast results.
Fiberglass-reinforced plastic backing pad facilitates a robust, reliable application.
Significantly more ergonomic than a conventional grinding wheel: Noise, vibrations and dust are significantly reduced. A considerably superior surface quality is also produced.
In contrast to flap discs, they can achieve flat surfaces due to their dimensional stability.
In contrast to conventional fibre discs, CC-GRIND®-ROBUST does not deform, even in extreme climates, and is considerably more robust in heavy-duty use.
The use of a special clamping flange set is not necessary due to the design.
Easily trimmable product.

Recommendations for use

Trim the CC-GRIND®-ROBUST on sharp metal edges, files, or with cutting inserts.
Trimming should only be done at a 45° contact angle of.
Press the disc carefully on to the workpiece and increase the pressure until a chip is formed. Keep the pressure until the disc has been trimmed to the desired dimension.
For optimum results, use with a flat contact angle.
Only use the face of the disc, not suitable for peripheral grinding (on edge).
Choose the CC-GRIND®-ROBUST SG STEELOX for deburring.