Abrasive spiral bands, conical

Spiral Band, 1-1/2" x 7/8 x 2-3/8, Tapered Shape, 80 Grit, Aluminum oxide

EDP:
41362
Technical information
Spiral Band, 1-1/2" x 7/8 x 2-3/8, Tapered Shape, 80 Grit, Aluminum oxide

Item number product.detail.hint.sku
42216108
Abrasive
Aluminum oxide A
Dia internal
7/8
Dia internal
36 mm
Dia internal, small
7/8 Inch
Dia internal, small
22 mm
Dia. external
1 1/2 Inch
Dia. external
38 mm
EDP no.
41362
Grit size
80
Height
2 3/8 Inch
Height
60 mm
RPM, optimum, from
10000 RPM
RPM, optimum, to
15900 RPM
Packaging unit
100 pieces
Description

For universal applications from coarse to fine grinding.

In ISO 2421, abrasive spiral bands are designated as "cylindrical sleeves".

GSB = bulk pack of abrasive spiral bands

Advantages
  • Abrasive spiral bands fit securely on the rubber drum holder as the holder expands during use.
  • Outstanding service life even under the toughest work conditions, due to special manufacturing.
  • Highest possible cost-effectiveness due to particularly high stock removal rate and aggressiveness of the abrasive.
Recommendations for use
  • To easily change the abrasive spiral bands, give them a slight clockwise twist and pull them up and off. When doing so, leave the rubber drum holder clamped in the power tool.
  • To ensure the abrasive spiral band is securely attached, follow the minimum speed for the rubber drum holder.
  • Use the appropriate grinding oil for the material to significantly increase the service life and the abrasive performance of the discs.
Ordering notes
  • Please order rubber drum holder separately.
Safety notes
  • The maximum permitted peripheral speed is 6,000 SFPM.
  • For safety reasons, the maximum permitted rotational speed indicated must never be exceeded.
  • Do not allow abrasive spiral bands to protrude beyond the rubber drum holder.
Workpiece materials
Aluminum
Annealed cast iron
Brass
Bronze
Cast steel
Cobalt-based alloys
Copper
Fibre-reinforced thermosetting plastics (GRP, CRP)
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Hardened, heat-treated steels over 370 HV (38 HRC)
Stainless steel (INOX)
Steel materials with a hardness > 54 HRC
Steels up to 370 HV (< 38 HRC)
Thermoplastics
Applications
Deburring
Leveling
Roughening
Sharpening
Step-by-step fine grinding
Surface work
Working on edges
Work on weld seams
Compatible power tools
Flexible shaft drive
Straight grinder
Downloads