Wheel brushes knotted, Pipeline COMBITWIST INOX-TOTAL, with hole

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .020 SS 7/8" Arbor

POS RBGIT 11506/22,2 PIPE CT INOX 0,50

EDP:: 82742

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .020 SS 7/8" Arbor 1

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .020 SS 7/8" Arbor 2

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .020 SS 7/8" Arbor 3

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .020 SS 7/8" Arbor 4

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .020 SS 7/8" Arbor Youtube

Technical data

Distributors-Search

Technical information

INOX-TOTAL Knot Wire Wheel Brush 4-1/2" Dia. .020 SS 7/8" Arbor

Item number product.detail.hint.sku: 43300032
Dia. external: 4-1/2 Inch
Dia. external: 115 mm
Dia. filament material: .014 Inch
Dia. filament material: 0.5 mm
Dia. hole: 7/8 Inch
Dia. hole: 22.2 mm
EDP number: 82742
Filament material: Stainless steel wire (INOX)
Mounting system: center hole
Number, knots: 36 pcs.
Packaging: POS packaging
RPM, max.: 12500 RPM
Trim length: 7/8 Inch
Trim length: 22 mm
Width: 3/16 Inch
Width: 6 mm
Packaging unit: 1 piece

Description

Very aggressive and robust brush that is able to withstand high mechanical loads. Perfect for heavy-duty brushing in pipeline and container construction.

In addition to brushes with a stainless steel filament, PFERD also offers brushes of the INOX-TOTAL type for work on stainless steel (INOX). It is particularly well suited to use in critical environments.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

The brush is degreased and does not leave any oil residue on the workpiece.

Advantages

Extra-slim design allows access to hard-to-reach areas such as root weld seams.
Maximum economic efficiency due to maximum service life and stock removal rate.
Brush runs smoothly due to it's flawless balance.
Designed for work on corners and edges as the knots are less likely to unravel.
Aggressive brushing action due to tightly-twisted wire knots.
Maximum protection against corrosion as all components are produced from stainless steel (INOX) of quality 1.4310 (V2A).
Very corrosion-resistant.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use on powerful variable speed angle grinders.

Workpiece materials: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing heat discolouration; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Compatible power tools: Angle grinder; Drive spindle; Flexible shaft drive; Straight grinder

PFERDVALUE

PFERDERGONOMICS

recommends the COMBITWIST® design to sustainably reduce the vibration produced during use and to improve comfort when working.

Downloads