Power Tube Brush 1-1/4" Dia. .008 Stainless Steel Wire 1/4" Stem SS/SS

Technical information

Item number product.detail.hint.sku: 79183407
Dia. external: 1-1/4 Inch
Dia. external: 32 mm
Dia. filament material: .008 Inch
Dia. filament material: 0.2 mm
Dia. shank: 1/4 Inch
Dia. shank: 6.35 mm
EDP no.: 83407
Filament material: Stainless steel wire (INOX)
Max. RPM: 2500 RPM
Mounting system: Shank
Overall length: 3-1/2 Inch
Overall length: 89 mm
RPM, optimum, from: 500 RPM
RPM, optimum, to: 1500 RPM
Width: 1 Inch
Width: 25 mm
Packaging unit: 36 pieces

Description

For light cleaning and deburring work on threaded holes or recesses, e.g. keyways.

In order to fulfill the requirements for brushing stainless steel (INOX), PFERD produces all stainless steel (INOX) brushes using 302 stainless steel wire. Practical experience gained from industrial use confirms that this wire quality achieves excellent corrosion resistance with optimum brush life. The wire found in stainless steel (INOX) brushes tends to become magnetic after cold working. All PFERD brush products with stainless steel wire (INOX) are color-coded blue in the Tool Manual. All of these brushes are recommended for use on all stainless steels (INOX), such as 316. The reason for this is a change in the microstructure caused by deformation (e.g. during the wire drawing process). This does not have any impact on the quality and corrosion resistance of the INOX filament. The filament is still resistant to corrosion.

Stainless steel wire (INOX) is temperature-resistant up to 850 °F.

Advantages

Highly flexible, enabling optimal adaptation to the workpiece contour.
Longer service life due to the design of the stem.
In tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.
Very corrosion-resistant.

Recommendations for use

Please observe the recommended rotational speeds.
Use with clockwise rotation.

Safety notes

For safe use, guide the brush into the workpiece before beginning work.
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Aluminum; Bronze; Cobalt-based alloys; Hard non-ferrous metal; High-temperature-resistant materials; Nickel-based alloys (e.g. Inconell and Hastelloy); Nickel or titanium-based superalloys; Other non-ferrous metals; Soft titanium alloys (tensile strength 500 N/mm²); Stainless steel (INOX); Titanium; Titanium alloys

Applications: Cleaning; Deburring; Derusting; Paint stripping; Removing heat discolouration; Removing oxide layers; Roughening

Compatible power tools: Flexible shaft drive; Manual application; Power drill

Downloads

Tube brushes, shank-mounted

Power Tube Brush 1-1/4" Dia. .008 Stainless Steel Wire 1/4" Stem SS/SS