Power Tube Brush 1/2" Dia. .005 BraStainless Steel Wire 5/32" Stem SS/SS

Technical information

Item number product.detail.hint.sku: 79183413
Dia. external: 1/2 Inch
Dia. external: 12.7 mm
Dia. filament material: .005 Inch
Dia. filament material: 0.12 mm
Dia. shank: 5/32 Inch
Dia. shank: 3.8 mm
EDP no.: 83413
Filament material: Brass wire (MES)
Max. RPM: 2500 RPM
Mounting system: Shank
Overall length: 3 1/2 Inch
Overall length: 89 mm
RPM, optimum, from: 500 RPM
RPM, optimum, to: 1500 RPM
Width: 1 Inch
Width: 25 mm
Packaging unit: 36 pieces

Description

For light cleaning and deburring work on threaded holes or recesses, e.g. keyways.

Brass wire filament brushes are designed for applications like surface finishing on copper or brass workpieces. Compared to steel wire, brass wire is softer and more flexible. For all brushes with brass wire, PFERD uses wire quality CuZn37.

Brass wire is temperature-resistant up to 350°F.

Advantages

Highly flexible, enabling optimal adaptation to the workpiece contour.
Longer service life due to the design of the stem.
In tube brushes with a short eyelet, the filament reaches up to the tip of the brush.
The bent end of the wire does not have any sharp edges, which prevents delicate surfaces from getting scratched.
Low-sparking.
Creates fine surfaces.

Recommendations for use

Please observe the recommended rotational speeds.
Use with clockwise rotation.

Safety notes

For safe use, guide the brush into the workpiece before beginning work.
When clamping the brush, ensure that the shank is clamped as far into the arbor as possible. This especially applies to high rotational speed ranges. The minimum clamping length is 10 mm.

Workpiece materials: Brass; Copper; Other non-ferrous metals; Zinc

Applications: Cleaning; Deburring; Removing oxide layers

Compatible power tools: Flexible shaft drive; Manual application; Power drill

Downloads

Tube brushes, shank-mounted

Power Tube Brush 1/2" Dia. .005 BraStainless Steel Wire 5/32" Stem SS/SS