Cup brushes knotted, standard twist, standard flag, CT 2 rows, with thread

COMBITWIST® Knot Wire Cup Brush 6" Dia. .023 CS 5/8-11" Thread

EDP:: 82557

COMBITWIST® Knot Wire Cup Brush 6" Dia. .023 CS 5/8-11" Thread Youtube

Technical data Change variant

Distributors-Search

Choose options

Dia. external

4 Inch 6 Inch

Dia. filament material

.020 Inch .023 Inch

Filament material

Stainless steel wire (INOX) Steel wire (ST)

Reset Filter

Technical information

COMBITWIST® Knot Wire Cup Brush 6" Dia. .023 CS 5/8-11" Thread

Item number product.detail.hint.sku: 79182557
Dia. external: 6 Inch
Dia. external: 150 mm
Dia. filament material: .020 Inch
Dia. filament material: 0.5 mm
Dia. thread: 5/8-11
EDP no.: 82557
Filament material: Steel wire (ST)
Max. RPM: 6000 RPM
Mounting system: Thread
Number, knots: 66
RPM, optimum, from: 3000 RPM
RPM, optimum, to: 6000 RPM
Trim length: 1-1/2 Inch
Trim length: 38 mm
Packaging unit: 1 piece

Description

The brush knots are knotted to 75% of the length.

The two-row brush is designed for brushing large areas and for heavy-duty brushwork, such as deburring, cleaning, derusting and descaling, as well as removing spatter.

Steel wire is the most common filament material. Brushes with steel wire as the filament material are ideal for work on surfaces and deburring. PFERD special wire has high tensile strength and bending fatigue strength. This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications.

Steel wire is temperature-resistant up to 600°F.

Advantages

Maximum economic efficiency due to maximum service life and stock removal rate.
Brush runs smoothly due to it's flawless balance.
Designed for work on corners and edges as the knots are less likely to unravel.
Optimal ratio of aggressiveness and flexibility.
Double-row design enables fast results due to larger filament width.
Long service life through use of PFERD special wire.

Recommendations for use

Please observe the recommended rotational speeds.
For best performance, use on powerful angle grinders.

Workpiece materials: Cast iron; Cast steel; Steel, cast steel; Steel materials with a hardness > 54 HRC; Steels up to 370 HV (< 38 HRC)

Applications: Cleaning; Deburring; Derusting; Descaling; Paint stripping; Removing oxide layers; Root seam processing; Work on fillet welds; Work on weld seams

Compatible power tools: Angle grinder

PFERDVALUE

PFERDERGONOMICS

recommends the COMBITWIST® design to sustainably reduce the vibration produced during use and to improve comfort when working.

Downloads